Thermal Shock Environmental Test Chamber
- High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999 cycles. The maximum setting of each section is 999 Hrs 59 Mins.
- Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
- Both 2 zone and 3 zone shocks can be chosen.
- All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
- Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
- Machine can be shut down automatically in case of electrical power instabilities.
- Internal Dimensions WxHxD(cm): 50x40*40
- External Dimensions WxHxD(cm): 150x193*160
- Temperature Range: (150°C~-65°C);(High temperature zone:+60°C~+150°C; Low temperature zone:-10°C~-65°C;)
- Heating Time (regenerative): RT~200°C about 35min
- Cooling Time (storage): RT~-70°C about 85min
- Temperature Response Time / Time Change: ≤5min /≤10seconds
- Precision Temperature Control / Distribution Accuracy: ±0.5°C /±2.0°C
- Inner and Outer Materials: The whole set is SUS 304# stainless steel treated with mist. Inner box is stainless steel
- Insulation Material: Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials
- Cooling System: Semi-hermetic double-stage compressor (water-cooled type) /Hermetic double-stage compressor (air-cooled type)
- Security Protection Devices: Non-fuse breaker, high and low pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system, electronic alarm
- Power: AC380V 50HZ/60HZ
- Weight (approximate): 1300